suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Replacement|Page 426 > < Lifter / Lash Adjuster, Valve|Specifications|Page 423
Page 1
background image

Lifter / Lash Adjuster: Service and Repair
Replacement

REMOVAL

1. Disconnect negative cable at battery.
2. Drain engine oil.
3. Drain coolant.
4. Remove oil pan and oil pump strainer.
5. Remove cylinder head cover.
6. Remove timing chain cover.
7. Remove 2nd timing chain.
8. Remove Camshaft Position (CMP) sensor.

9. After removing 2nd timing chain, set key on crankshaft in position as shown by turning crankshaft. This is to prevent interference between valves

and piston.

Replacement|Page 426 > < Lifter / Lash Adjuster, Valve|Specifications|Page 423