Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
B: Piston clearance = 0.02 - 0.04 mm (0.0008 - 0.0015 inch).
C: Allowance for honing = 0.02 mm (0.0008 inch).
5. Rebore and hone cylinder to calculated dimension.
NOTE: Before reboring, install lower tighten to specification to avoid distortion of bearing bores.
6. Measure piston clearance after honing.
Check Valve
Check check valve for clogging and ball for being stuck.