Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
Drive Belt: Service and Repair
Replacement
REMOVAL
1. Disconnect negative cable at battery.
2. Loosen adjusting bolt and pivot bolts.
3. Slacken belt by displacing fan pulley.
4. Remove cooling fan. Just detach the fan/clutch from fan pulley.
5. Remove cooling fan belt.
INSTALLATION
1. Install belt to fan pulley and crankshaft pulley.
2. Install cooling fan.
3. Adjust belt tension as specified.
4. Tighten adjusting bolt and pivot bolts.
5. Connect negative cable at battery.