Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
7. For reinstallation of timing chain, turn crankshaft so that timing marks on cylinder head and cylinder block match with those on sprockets as
shown in figure.
8. Remove 2nd timing chain.
9. Remove timing chain guide No.1.
10. Remove timing chain tensioner adjuster No.1.
11. Remove timing chain tensioner.
12. Remove idler sprocket and 1st timing chain.
13. Remove crankshaft timing sprocket.
INSTALLATION
1. Check that crank timing sprocket key is in match with timing mark on cylinder block.
2. Install crankshaft timing sprocket as shown in figure.
3. Apply oil to bush of idler sprocket.
4. Install idler sprocket and sprocket shaft.