Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
7. Turn crankshaft to meet following condition.
-
Key (1) on crankshaft position as shown.
-
Arrow mark on idler sprocket (2) points upward vertically.
-
The marks on sprockets (0 match with marks on cylinder head.
Note that this step must be followed for reinstallation of timing chain.
8. Remove timing chain tensioner adjuster No.2. To remove it, slacken 2nd timing chain by turning intake camshaft counterclockwise a little while
pushing back pad.
9. Remove intake and exhaust camshaft timing sprocket bolts. To remove it, fit a spanner to hexagonal part at the center of camshaft to hold it
stationary.
10. Remove camshaft timing sprockets and 2nd timing chain.
CAUTION: Do not turn camshaft more than necessary. If turned excessively, valve and piston may get damaged.