Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
CAUTION: After 2nd timing chain is removed, never turn intake camshaft, exhaust camshaft and crankshaft independently more than such an
extent as shown. If turned, interference may occur between piston and valves and valves themselves, and parts related to piston and valves may be
damaged.
INSTALLATION
1. Check that crank timing sprocket key is in match with timing mark on cylinder block as shown in figure.
2. Check that arrow mark on idler sprocket faces upward as shown in figure.
3. Check that knock pins of intake and exhaust camshafts are aligned with timing marks on cylinder head as shown in figure.