Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
12. Using hydraulic press and drift, remove bearing race.
13. Remove hub bolts from hub.
INSTALLATION
1. Install in reverse order of removal.
2. Install sensor rotor as shown.
NOTE:
^
Pipe used here should have inner diameter of 90 mm (3.55 inch) - 96 mm (3.77 inch) and its outside should not contact teeth of sensor rotor.
^
Use care not to insert wheel hub diagonally.
3. Install wheel hub, brake disc, brake caliper, locking hub and wheel.
