Sidekick JSS 4D Hard Top 2WD L4-1.8L (1997)
11. Install shift control lever (1) and check to make sure that it shifts smoothly according to shift pattern as shown in figure.
NOTE:
-
Apply thread lock cement to control lever locating bolts (2) when replaced.
-
Be sure to apply sealant to mating surface of gear shift lever case (3) for its final installation.
"A": Cement 99000 - 32020
Tightening Torque
(a): 17 Nm (1.7 kg-m, 12.5 ft. lbs.)