Sidekick JX 2D 4WD L4-1.6L (1998)
2. Torque each bolt and nut as specified below and in the figure. Torque bolts (a) to 23 Nm (17.0 ft. lbs.), flare nuts (b) to 16 Nm (11.5 ft. lbs.) and
bleeder screw (c) to 12 Nm (9.0 ft. lbs.).
3. Upon completion of installation, fill reservoir tank with specified fluid and bleed air from brake system.
4. After bleeding air, check that LSPV is installed properly.
NOTE: Make sure to bleed air from LSPV bleeder.
