Sidekick JX 2D 4WD L4-1.6L (1998)
3. Check that timing mark on camshaft timing belt pulley is aligned with "V" mark on cylinder head cover. If not, align two marks by turning
camshaft but be careful not to turn it more than its allowable turning range.
4. Check that punch mark on crankshaft timing belt pulley is aligned with arrow mark on oil pump case. If not, align two marks by turning crankshaft
but be careful not to turn it more than its allowable turning range.
5. Install timing belt and tensioner spring.
With two sets of marks aligned and tensioner plate pushed up, install timing belt on two pulleys in such a way that drive side of belt is free from
any slack.
And-then install tensioner spring as shown in figure, and hand-tighten tensioner stud.
NOTE:
^
When installing timing belt, match arrow mark (my) on timing belt with rotating direction of crankshaft.
^
In this state, No. 4 piston is at top dead center of compression stroke.
