suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

General Description|Page 3038 > < Free Wheeling Hub|Page 3032
Page 1
background image

Tires: Description and Operation
General Description

TIRES:

The tires are of tubeless type. The tires are designed to operate satisfactorily with loads up to the full rated load capacity when inflated to the
recommended inflation pressure.
Correct tire pressures and driving habits have an important influence on tire life. Heavy cornering, excessively rapid acceleration, and unnecessary
sharp braking increase tire wear.

This vehicle is equipped with following tire: P205/75R 15

REPLACEMENT TIRES:

When replacement is necessary, the original equipment type tire should be used. Refer to the Tire Placard. Replacement tires should be of the
same size, load range and construction as those originally on the vehicle. Use of any other size or type tire may affect ride, handling,
speedometer/odometer calibration, vehicle ground clearance and tire or snow chain clearance to the body and chassis.

NOTE:  Do not mix different types of tires on the same vehicle such as radial, bias and bias-belted tires except in emergencies, because vehicle
handling may be seriously affected and may result in loss of control.

It is recommended that new tires be installed in pairs on the same axle. If necessary to replace only one tire, it should be paired with the tire having
the most tread, to equalize braking traction.

The metric term for tire inflation pressure is the kilopascals (kPa). Tire pressures will usually be printed in both kPa and psi on the Tire Placard.
Metric tire gauges are available from tool suppliers. The chart converts commonly used inflation pressures from kPa to psi.

General Description|Page 3038 > < Free Wheeling Hub|Page 3032