Sidekick JX 2D 4WD L4-1.6L (1998)
Universal Joint: Service and Repair
DISASSEMBLY OF UNIVERSAL JOINT
Disassembling On Propeller Shaft Yoke Side
1. Using special tool(A), remove 2 circlips.
Special Tool
(A): 09900-06108
2. Using special tool(B), push spider bearing race out 3 - 4 mm (0.12 - 0.16 inch) from shaft yoke race.
NOTE: Before pushing it out, apply penetrate lubricant between bearing race and yoke race.
Special Tool
(B): 09926-48010
Length "a": 3 - 4 mm (0.12 - 0.16 inch)
3. Tapping yoke with a hammer, completely remove bearing race.
4. Take out bearing race on the other side in the same way as in 2) and 3).
Disassembling On Flange Yoke Side