Sidekick JX 2D 4WD L4-1.6L (1998)
Gear Sensor/Switch: Testing and Inspection
4WD Low Switch
4WD LOW SWITCH INSPECTION
1. Disconnect negative cable at battery.
2. Disconnect 4WD low switch coupler.
3. Check continuity between 4WD low switch terminals.
There should be continuity when transfer lever shifted to 4L position and should be infinity when transfer lever shifted to 4H or 2H positions. If
not, replace 4WD low switch.
4. Connect 4WD low switch coupler and battery negative cable.