Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Clearance "b" is 0 mm (0 inch.)
3. Adjust clearance by turning adjusting screw of piston rod. Use special tool No. 09952-16010.
NOTE: When adjusted as above, its negative pressure is applied to the booster with the engine at idle, piston to piston rod clearance "a" should be as
follows:
Clearance "a" is as follows:
^
SE series 2-door vehicle without ABS is 0.25 - 0.5 mm (0.010 - 0.020 inch.)
^
Other SE series vehicles is 0.14 - 0.35 mm (0.006 - 0.014 inch.)
^
SZ series is 0.14 - 0.35 mm (0.OC6 - 0.014 inch.)
NOTE:
^ SE Series
4WD Model . . . . . . . .(tire size P205/75R 15)
2WD Model . . . . . . . .(tire size P195/75R 15)
^ SZ Series
2WD and 4WD Models . . . (tire size P195/75R 15)