Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
ABS Main Relay: Component Tests and General Diagnostics
ABS Fail-Safe Relay
ABS FAIL-SAFE RELAY/ABS PUMP MOTOR RELAY
1. Disconnect negative cable from battery.
2. Remove fail-safe relay or pump motor relay from bracket.
3. Check resistance between each of the following two terminals at 20° C, 68° F.
Between terminals 1 and 3: 70 - 90 ohms
Between terminals 2 and 5: continuity
Between terminals 4 and 5: no continuity
4. Check that there is continuity between terminal Nos. 4 and 5 when battery is connected to terminals 1 and 3.
5. If check result is not as specified in Step 3 and 4, replace as necessary.
ABS Pump Motor Relay
ABS FAIL-SAFE RELAY/ABS PUMP MOTOR RELAY
1. Disconnect negative cable from battery.
2. Remove fail-safe relay or pump motor relay from bracket.
3. Check resistance between each of the following two terminals at 20° C, 68° F.
Between terminals 1 and 3: 70 - 90 ohms
Between terminals 2 and 5: continuity
Between terminals 4 and 5: no continuity