Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Valve: Service and Repair
DISASSEMBLY
1. For ease in servicing cylinder head, remove distributor gear case, intake manifold with throttle body and exhaust manifold from cylinder head.
2. Remove camshaft as previously outlined and remove rocker arms and washers by pulling its shaft out to transmission side.
3. Using special tool (Valve lifter), compress valve springs and then remove valve cotters by using special tool (Forceps) as shown.
Special Tool:
(A): 09916-14510 or equivalent
(B): 09916-14910 or equivalent
(C): 09916-84510 or equivalent
4. Release special tool, and remove spring retainer and valve spring.
5. Remove valve from combustion chamber side.
6. Remove valve stem oil seal from valve guide, and then valve spring seat.
NOTE: Do not reuse oil seal once disassembled. Be sure to use new oil seal when assembling.
