Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
2. Install free wheeling hub body assembly on front wheel hub.
Tightening Torque (a): 25 Nm (18.0 ft. lbs.)
3. Install cover assembly to body assembly so that follower stopper nail is fitted into groove of body assembly.
NOTE: Before installing cover assembly, make sure following points.
^
"O" mark on knob is at "FREE" position.
^
Clutch is lifted to cover side, if not (as shown in figure) may cause malfunction.
^
Gasket is set justly.
There are two follower stopper nails and two grooves which can be fitted freely.
4. Fix cover assembly to body assembly with cover bolts.
Tightening Torque (b): 10 Nm (7.5 ft. lbs.)
