Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
7. Disconnect stabilizer ball joint, by loosening its nut.
8. Disconnect tie rod end using special tool.
Special Tool (A): 09913-65210 or equivalent.
9. Support lower arm, using jack as shown.
10. Remove strut bracket bolts.
11. Remove ball stud castle nut.
12. By tapping knuckle on its end with hammer or using puller, disconnect knuckle from ball stud.
13. Remove knuckle and wheel hub comp, while lowering lack.