Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
5.
Fit the Front Strut Reinforcement into the Strut Tower through the Outer Wheel Well and mark its position and contact area. Scrape the
undercoating from the contact area as shown in the illustration. Spray primer on the scraped area to prevent rust. Use care to prevent overspray.
(Left side shown as an example.)
6.
Assemble the Front Strut Stay and Front Strut Reinforcement using the supplied bolt. Torque bolt to 36.8 lb-ft (50 Nm, 5.0 Kg-m)