Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
Wheel Bearing: Service and Repair
Front
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove locking hub.
3. Remove caliper bolt and suspend caliper.
4. Remove brake disc.
NOTE: If brake disc can not be removed by hand, use 8 mm bolts as shown.
5. Remove front wheel bearing lock plate by loosening 4 screws.
6. Remove front wheel bearing lock nut by using special tool.
Special Tool (A): 09951-16050 or equivalent.
7. Remove front wheel bearing lock washer.
