Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
If faulty operation is still noted even after greasing, correct defective part or replace it with new one.
CAUTION: Hubs should not be packed with grease.
Automatic
MAINTENANCE SERVICE
Confirm automatic free wheeling hub for proper operation periodically according to the procedure described in "post-assembly confirmation". If
automatic free wheeling hub shows any malfunction, replace it with new one. See: Installation/Automatic
Manual
INSTALLATION INSTRUCTION
After removing front axle shaft drive flange, install parts: (shown in figure) according to following procedure.
1. After aligning "O" mark on knob of free wheeling hub cover with "FREE" position, separate free wheeling cover assembly from body assembly.
