Sidekick JX 4D Hard Top 4WD L4-1.6L (1997)
NOTE:
-
Reverse gear shift fork spring pin is different from other spring pins in length. It is longer than other spring pins.
-
When pressing gear shift fork spring pin into reverse gear shift fork, do not allow to go all the way in, but leave its end protruded as much as
the length shown in the figure.
2. With interlock pin fit to high speed gear shift shaft, insert it into case and set fork with spring pin and then put in interlock ball.
NOTE:
-
Note that high speed gear shift shaft can't be inserted unless reverse gear shift shaft is placed at neutral position.
-
When inserting high speed gear shift shaft, use care not to drop interlock pin.