Sidekick Sport 2D JLX 4WD L4-1.8L (1998)
1. Check shift control lever lower portion and control lever locating sheet for excessive wear, and boot for damage. Correct or replace if necessary.
2. Apply grease to pivot portions and seat, then install shift control lever.
"A": Grease 99000-25010
3. Perform above steps also for transfer shift control lever.
4. If control lever locating bolts (a) are replaced or retightened, torque them as specified below. Replacing of control lever locating bolts requires
thread lock cement.
"B": Cement 99000-32020
Tightening Torque
(a): 17 Nm (1.7 kg-m, 12.5 ft. lbs.)
5. Install transmission boot No. 1 from inside of cabin and clamp it with a new clamp securely.
6. Install transfer boot No. 1 securely on lift and clamp it by using a new clamp.
