suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3530 > < Initial Inspection and Diagnostic Overview|Page 3528
Page 7
background image

The Antilock Brake System (ABS) control module monitors the voltage at each terminal ("A1", "A14" and "A15") of the solenoid circuit constantly
with the ignition switch turned ON as well as the voltage at the monitor terminal "A13" of the pump motor circuit. When all four solenoid terminal
voltages are below the specified value or the voltage at the motor monitor terminal became below the specified value while the pump motor is
operating, this DTC will be set. As soon as the voltage rises to the specified level, the set DTC will be cleared.

(Part 1 Of 2)

Initial Inspection and Diagnostic Overview|Page 3530 > < Initial Inspection and Diagnostic Overview|Page 3528