suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Interior Moulding / Trim > < Hood Striker - Campaign L4|Page 2241
Page 1
background image

Hood Latch: All Technical Service Bulletins
Recall 93V189000: Hood Striker Weld Cracks

Mislocated attaching spot welds of the hood striker assembly cause cracks to start on the hood inner panel. If cracks occur, the hood striker assembly
may not properly engage the hood latch when the hood is closed. An improperly engaged hood latch may result in a hood fly-up while the vehicle is in
motion. This could obstruct the driver's view and could cause a vehicle crash.

Suzuki will (a) install two bolts and nuts to secure the striker assembly to the hood inner panel, and (b) ensure that the hood latch assembly fasteners are
properly tightened.

System: Structure; hood assembly.

Vehicle description: Passenger cars.

Note: If your vehicle is presented to an authorized dealer on an agreed upon service date and the remedy is not provided within a reasonable time and
free of charge or the remedy does not correct the defect or non
compliance, please contact suzuki service center at 1-714-996-7040. Also, please contact the National Highway Traffic Safety Administration's auto
safety hotline at 1-800-424-9393.

Interior Moulding / Trim > < Hood Striker - Campaign L4|Page 2241