suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Transmission Position Switch/Sensor, A/T > < TPS Resistance Specification at Idle - Correction|Page 1075
Page 1
background image

Throttle Position Sensor: Service and Repair

1.

Disconnect battery ground cable, then coupler from TPS.

2.

Remove TPS from throttle body.

3.

Reverse procedure to install. Adjust installation angle of TPS as outlined under ``Adjustment.'' 

Transmission Position Switch/Sensor, A/T > < TPS Resistance Specification at Idle - Correction|Page 1075