Swift L4-1298cc 1.3L DOHC 3 MFI 16V (1989)
Canister Purge Solenoid: Testing and Inspection
Fig. 2 Vacuum Hose Routing
Do not inhale fuel vapor inside valve.
1.
With ignition switch Off, disconnect coupler from VSV.
2.
Check resistance between two terminals of VSV. On Swift, resistance should be 33--39 ohms. On Sidekick, resistance should be 30--38 ohms.
3.
On all models, if resistance is not as specified, replace VSV. If resistance is as specified, proceed to step 4.
4.
Remove VSV.
5.
Blow into nozzle A, Fig. 2, Air should not come out of nozzle B.
6.
Connect 12 volt battery to VSV terminals, blow into nozzle A, Fig. 2, Air should come out of nozzle B.
7.
If tests are not satisfactory, replace VSV.
