suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Sensors and Switches - Ignition System > < TPS Resistance Specification at Idle - Correction|Page 900
Page 1
background image

Throttle Position Sensor: Service and Repair

1.

Disconnect battery ground cable, then coupler from TPS.

2.

Remove TPS from throttle body.

3.

Reverse procedure to install. Adjust installation angle of TPS as outlined under ``Adjustment.'' 

Sensors and Switches - Ignition System > < TPS Resistance Specification at Idle - Correction|Page 900