Swift L4-1298cc 1.3L DOHC 3 MFI 16V (1989)
Shift Interlock Solenoid: Service and Repair
Fig. 28 Removing Back Drive Solenoid
1.
Shift selector lever to Low, then remove console box, parking brake lever cover, shift control lever cover and select indicator.
2.
Remove back drive solenoid attaching screw, then solenoid, Fig. 28.
3.
Reverse procedure to install, checking the following:
a. Ensure detent pin is locked at Park position by lock plate.
b. Ensure lock plate is pulled in when ignition key is turned On.