Swift L4-1298cc 1.3L DOHC 3 MFI 16V (1989)
Fig. 10 Pinion Return Test Lead Connections
1.
Perform ``Hold-In Test,'' then disconnect negative lead from body, Fig. 10.
2.
Pinion must retract quickly. If pinion remains out, replace magnetic switch.
No-Load Performance Test
Fig. 11 No-load Performance Test Lead Connections
1.
Connect test leads as shown in Fig. 11.
2.
Pinion should move out and motor should run without stopping.
3.
Check ammeter current. Refer to Starting and Charging/Starting System/Specifications.