Swift L4-1298cc 1.3L SOHC MFI (1997)
center pillar.
10) Lower window fully, then remove rear sash mounting screw (2).
1. Rear sash
11) Remove glass fitting screws (2). Then, take out door glass (1) together with bottom channel (3).
12) Detach glass from bottom channel.
Installation
Reverse removal sequence to install door glass and/or partition glass. However, be careful of the following points.
1) When installing glass to bottom channel (1), coat channel with soap water and tap it with a plastic hammer. Glass-fitted position of bottom channel
is as shown.
Dimension "a": 241 - 245 mm (9.49 - 9.65 in.)
