Swift L4-1298cc 1.3L SOHC MFI (1997)
Brake Caliper: Service and Repair
Replacement
REMOVAL
1. Hoist vehicle and remove wheel.
2. Remove brake flexible hose mounting bolt from caliper. This will allow fluid to flow out of hose, have a container ready beforehand.
3. Remove caliper pin bolts.
4. Remove caliper from carrier.
INSTALLATION
1. Install caliper to caliper carrier.
2. Torque caliper pin bolts (a): 22 - 32 Nm (16.0 - 23.0 ft. lbs.).
NOTE: Make sure that boots are fit into groove securely.
