Swift L4-1298cc 1.3L SOHC MFI (1997)
Piston and Boot
1. Before inserting piston into cylinder, install boot onto piston as shown in above image.
2. Fit boot as it is in above image into boot groove in cylinder with fingers.
3. Insert piston into cylinder by hand and fit boot in boot groove in piston.
4. To confirm that boot is fitted in its groove in cylinder properly, pull piston out of cylinder a little but do not take it all out.
NOTE: Boot face "B" should be at the same level from cylinder face "A" all around.
5. Insert piston into cylinder by hand.
