Swift L4-1298cc 1.3L SOHC MFI (1997)
Brake Master Cylinder: Adjustments
GENERAL INFORMATION
The length of booster piston rod is adjusted to provide specified clearance "a" 0 mm (0 inch) between piston rod end and master cylinder piston.
^
Before measuring clearance, push piston rod several times so as to make sure reaction disc is in place.
^
Keep inside of booster at atmospheric pressure for measurement.
1. Set special tool (A): 09950-96010 on master cylinder and push pin until contacts piston.
2. Turn special tool upside down and place it on booster. Adjust booster piston rod length until rod end contacts pin head. (Between special tool
and piston rod)
