Swift L4-1298cc 1.3L SOHC MFI (1997)
Brake Master Cylinder: Service and Repair
Brake Fluid Reservoir
NOTE: Do not allow brake fluid to get on painted surfaces.
REMOVAL
1. Disconnect reservoir lead wire at coupler.
2. Clean outside of reservoir.
3. Take out fluid with syringe or such.
4. Remove reservoir connector pin by using special tool (A): 09922-85811.
5. Remove reservoir.
INSTALLATION
1. When using new grommets, lubricate them with the same fluid as the one to fill reservoir with. Then press-fit grommets to master cylinder.
Grommets must be seated in place.
