suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Coolant Reservoir > < Cooling System|Capacity Specifications|Page 902
Page 1
background image

Coolant Line/Hose: Service and Repair

REMOVAL 

1. Drain cooling system.
2. To remove these pipes or hoses, loosen screw on each pipe or hose clip and pull hose end off.

INSTALLATION 

Install removed parts in reverse order of removal procedure, noting the following.
-

Tighten each clamp bolt securely.

-

Refill cooling system with proper coolant.

Coolant Reservoir > < Cooling System|Capacity Specifications|Page 902