Swift L4-1298cc 1.3L SOHC MFI (1997)
Ignition Cable: Testing and Inspection
-
Remove high-tension cord at ignition coil while gripping its cap.
-
Remove distributor cap installed with high-tension cords.
-
Remove high-tension cord clamp from cylinder head cover.
-
Pull out high-tension cords from spark plugs while gripping each cap.
CAUTION:
-
Removal of high-tension cords together with clamps will be recommended so as not to damage their inside wire (resistive conductor).
-
For the same reason, pull out each connection by gripping cap portion.
-
Measure resistance of high-tension cord by using ohmmeter.
High-tension cord resistance: 10 - 22 k ohms/m (3.0 - 6.7 k ohms/ft)
-
If resistance exceeds specification, inspect distributor terminal and replace high-tension cord(s) and/or distributor cap as required.
CAUTION:
-
Never attempt to use metal conductor high-tension cords as replacing parts.
-
Insert each cap portion fully when installing high-tension cords.