Swift 13L SOHC MFI Engine Control Module Overview
Engine Control Module: Description and Operation
Self-Diagnosis Function
ECM performs on-board diagnosis on the system and parts that influence the vehicle emission in compliance with OBD-II regulation. ECM and
malfunction indicator lamp ("SERVICE ENGINE SOON" light) operate as follows.
-
Malfunction indicator lamp lights when the ignition switch is turned ON (but the engine at stop) regardless of the condition of Engine &
emission control system (Electronic Fuel Injection system). This is only to check the malfunction indicator lamp bulb and its circuit.
-
If the system and parts that influence the vehicle emission is free from any malfunction after the engine start (while engine is running),
malfunction indicator lamp turns OFF.
-
When ECM detects a malfunction, it makes malfunction indicator lamp turn ON or flashing while the engine is running to warn the driver of
such occurrence of trouble and at the same time it stores the applicable diagnostic trouble codes in ECM memory.
