suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Relay, Idle Speed Control Actuator <--> [Relay, Idle Speed/Throttle Actuator - electronic] > < Main Relay (Computer/Fuel System)|Specifications|Page 1044
Page 1
background image

Main Relay (Computer/Fuel System): Testing and Inspection

1. Disconnect negative cable at battery.

2. Remove main relay from relay box.

3. Check resistance between each two terminals as in table above. If check results are as specified, proceed to next operation check. If not, replace.

4. Check that there is continuity between terminals "A" and "B" when battery is connected to terminals "C" and "D". If found defective, replace.

Relay, Idle Speed Control Actuator <--> [Relay, Idle Speed/Throttle Actuator - electronic] > < Main Relay (Computer/Fuel System)|Specifications|Page 1044