Swift L4-1298cc 1.3L SOHC MFI (1997)
Alternator: Description and Operation
GENERAL DESCRIPTION
The basic charging system is the IC intregal regulator charging system.The internal components are connected electrically as shown above.
The generator features a solid state regulator that is mounted inside the generator. All regulator components are enclosed into a solid mold, and this
unit along with the brush holder assembly is attached to the rear housing. The regulator voltage setting cannot be adjusted.
The generator rotor bearings contain enough grease to eliminate the need for periodic lubrication. Two brushes carry current through the two slip rings
to the field coil mounted on the rotor, and under normal conditions will provide long period of attention-free service.
The stator windings are assembled on the inside of a laminated core that forms part of the generator frame. A rectifier bridge connected to the stator
windings contains eight diodes, and electrically changes the stator A.C. voltages to a D.C. voltage which appears at the generator output terminal.The
neutral diodes serve to convert the voltage fluctuation at the neutral point to direct current for increasing the generator output.
A condenser mounted in the rear housing suppresses radio noise.
