Swift L4-1298cc 1.3L SOHC MFI (1997)
Power Steering Bleeding: Service and Repair
1. Jack up the front end of vehicle and apply rigid rack.
2. Fill oil tank with fluid up to specified level.
3. After running engine at idling speed for 3 to 5 seconds, stop it and add fluid to satisfy specification.
4. With engine stopped, turn steering wheel to the right and left as far as it stops, repeat it a few times and fill fluid to specified level.
5. With engine running at idling speed, repeat stop-to-stop turn of steering wheel till all foams in oil tank are gone.
NOTE: Make sure to bleed air completely. If air remains in fluid, P/S pump may make humming noise or steering wheel may feel heavy.
6. Finally check to make sure that fluid is filled to specified level.
