Swift L4-1298cc 1.3L SOHC MFI (1997)
Steering Column Lock: Service and Repair
REMOVAL
1. Disconnect negative battery cable.
2. Disable air bag system. Refer to Air Bags and Seat Belts.
3. Remove steering column.
4. Using center punch as shown, loosen and remove steering lock mounting bolts. Use care not to damage aluminum part of steering lock body with
center punch.
5. Turn ignition key to "ACC" or "ON" position and remove steering lock assembly from steering column.
INSTALLATION
1. Position oblong hole of steering shaft in the center of hole in column.
2. Turn ignition key to "ACC" or "ON" position and install steering lock assembly onto column.
3. Now turn ignition key to "LOCK" position and pull it out.
4. Align hub on lock with oblong hole of steering shaft and rotate shaft to assure that steering shaft is locked.