Swift L4-1298cc 1.3L SOHC MFI (1997)
Suspension Spring ( Coil / Leaf ): Service and Repair
REMOVAL
1. Hoist vehicle and remove wheel.
2. To facilitate toe adjustment after reinstallation, confirm which one of lines stamped on washer is in the closest alignment with stamped line (A) on
control rod inside mount part of vehicle body or put match marks.
Then remove control rod inside bolt (body center side).
3. Remove outside (wheel side) of control rod from rear knuckle stud bolt and disconnect stabilizer bar from suspension arm.
4. Loosen rear mount nut of suspension arm.
NOTE: But don't remove bolt.
5. Loosen front nut of suspension arm.
For vehicles equipped with ABS. Disconnect coupler of ABS wheel speed sensor and remove sensor pipe from suspension arm.
