Swift L4-1298cc 1.3L SOHC MFI (1997)
2. Using Special Tool (B): 09925-98210, or equivalent install input shaft bearing to flywheel.
3. Aligning clutch disc with flywheel center by using Special Tool (A): 09924-17810 and (C): 09923-36330, or equivalent, install clutch cover and
bolts. Then tighten bolts to specification.
NOTE:
^
While tightening clutch cover bolts, compress clutch disc with special tool (clutch center guide) by hand so that disc is centered.
^
Tighten cover bolts little by little evenly in diagonal order.
Tightening Torque (b): 18 - 28 Nm (13.5 - 20.0 ft. lbs.)
4. Slightly apply grease to input shaft, then join transmission assembly with engine.
"A": SUZUKI SUPER GREASE I, or equivalent
NOTE: Turn crankshaft a little through flywheel gear while inserting transmission input shaft to clutch disc until splines mesh.