Swift L4-1298cc 1.3L SOHC MFI (1997)
1. Install flywheel to crankshaft and tighten bolts to specification using Special Tool (A): 09924-17810, or equivalent.
Tightening Torque (a) 75 - 80 Nm (54.5 - 57.5 ft. lbs.)
2. Using Special Tool (B): 09925-98210, or equivalent install input shaft bearing to flywheel.
3. Aligning clutch disc with flywheel center by using Special Tool (A): 09924-17810 and (C): 09923-36330, or equivalent, install clutch cover and
bolts. Then tighten bolts to specification.
NOTE:
^
While tightening clutch cover bolts, compress clutch disc with special tool (clutch center guide) by hand so that disc is centered.
^
Tighten cover bolts little by little evenly in diagonal order.
