suzuki Workshop Repair Guides

Suzuki Workshop Service and Repair Manuals

Front Door Latch|Service and Repair|Page 2934 > < Front Door Latch|Service and Repair|Page 2932
Page 3
background image

If play is not within specification, repair or replace defective part.

Push rod play
"a" : 0.1 - 1.5 mm (0.004 - 0.060 in.)

CAUTION:  If play is out of specification, it can cause operational problem after use.

4. Connect other rod(s) to each joint (3) if disconnected.

5. After installing, confirm that door does not open when inside looking lever is at lock position and opens when it is at unlock position.
6. Install other removed parts by reversing removal procedure.
7. Install door latch striker (2) if removed.

Move door latch striker up and down so that its shaft (3) approximately aligns with the center of groove (A) of door latch (1).

NOTE:  Striker should be placed level and moved vertically. Do not adjust door latch.

Front Door Latch|Service and Repair|Page 2934 > < Front Door Latch|Service and Repair|Page 2932