Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Headliner: Service and Repair
Roof Lining Removal and Installation
Roof Lining Components
Removal
1. Remove sunvisor assembly.
2. Remove dome light.
3. Remove assist grips.
4. Remove door weatherstrips.
5. Remove pillar trims.
6. Remove quarter window trim. (For 2-door model.)
7. Remove roof lining.
Adhesive used for securing head lining in place should be cleaned with solvent.
Installation
1. Attach two-side bondable tape (1) (about 50 mm long) at center of rear end of roof lining. (2-door model only.)
2. Apply adhesive to top surface of roof lining at A marked 4 places.
