Swift GA L4-1298cc 1.3L SOHC MFI (2001)
8. Remove brake back plate.
INSTALLATION
1. Apply water tight sealant to mating surfaces of brake back plate and rear knuckle.
"A": Sealant 99000-31090
2. Install brake back plate and tighten back plate bolts to specified torque.
Tightening Torque (a): 23 Nm (2.3 kg-m, 17.0 ft. lbs.)
3. Install parking brake cable to brake plate.
4. Install wheel cylinder, and tighten wheel cylinder bolts and brake pipe flare nut to specified torque. (Refer to steps 1) to 4) of wheel cylinder.)
See: Wheel Cylinder
5. Install brake shoes, referring to steps 1) and 2) of its INSTALLATION.
See: Brake Shoe
6. Install wheel hub, washer and new spindle nut.