Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Wheel Cylinder: Service and Repair
REMOVAL
1. Perform steps 1) to 3) of Brake Shoe; Service and Repair.
2. Loosen brake pipe flare nut but only within the extent that fluid does not leak.
3. Remove wheel cylinder mounting bolts. Disconnect brake pipe from wheel cylinder and put bleeder plug cap onto pipe to prevent fluid from
spilling.
INSTALLATION
1. Apply water tight sealant to joint seam of wheel cylinder and brake back plate. Then take off breather plug cap from brake pipe and connect pipe
to wheel cylinder just enough to prevent fluid from leaking.
"A": Sealant 99000-31090
