Swift GA L4-1298cc 1.3L SOHC MFI (2001)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
Removal and Installation
ABS ACTUATOR ASSEMBLY (HYDRAULIC MODULATOR/MOTOR PACK ASSEMBLY)
REMOVAL
WARNING: To help avoid personal injury, due to a retained load on the hydraulic modulator/motor pack assembly, the gear tension relief
function of the TECH-1 must be performed prior to removal of the hydraulic modulator.
1. Using the TECH-1, perform the gear tension relief sequence.
2. Remove battery from vehicle.
3. Drain brake fluid in reservoir, master cylinder and ABS actuator assembly.
4. Disconnect solenoid couplers.
NOTE: Place a shop towel beneath the hydraulic modulator brake pipes to prevent brake fluid from contaminating motor pack or electrical
couplers.
